> Electric Components > ESC

The Century Electron Brushless ESC's come easy to program with 4 flying modes. Just throttle up before plugging in your battery to enter programming mode, then throttle down upon selecting a mode indicated by the number of beeps (1 beep = mode 1, 2 beeps = mode 2, etc...) Disconnect the battery, wait a few seconds, plug in the battery and start flying. The ESC features governor mode and non-governor mode for helicopters and airplanes. Soft-start when throttle has been in down position for longer than 15 seconds.

Features:

• Easy to Use: 4 Flying Modes
• Supports Quick Throttle Response
• Supports Linear Throttle Output
• Supports Stable RPM Control
• Supports Compatibility with Most Brushless Motors
• Supports High Speed Brushless Motor
• 2-Pole Brushless Motors up to 240,000rpm
• 6-Pole Brushless Motor up to 80,000rpm
• 12-Pole Brushless Motor up to 40,000rpm
• Built-in Throttle Calibration Function
• Built-in Soft Start Function for Helicopter
• Built-in Governor Function for Helicopter
• Built-in Auto Motor Timing Function
• Built-in World Famous Brand MOSFET with High Quality, Reliability & Low Impedance
• Two Stage Protection Soft Cut then Hard Cut
• Low Battery Protection for LiPo/LiOn Battery
• High Temperature Protection for ESC Body

Specifications:

• PWM Frequency: 12Khz
• BEC Continuous Output: 2.0A
• BEC 15Sec Peak Output: 2.5A
• BEC Servo Support:
    2Cell / 7.4V: 4 Micro Servos
    3Cell / 11.1V: 4 Micro Servos
    4Cell / 14.8V: 2 Micro Servos
• Continuous / 15Sec Peak Current: 25A / 33A
• Maximum Operation Voltage / LiPo Cell: 25V/6-Cell
• Low Battery Protection:
    Soft Cut Voltage: 2.9V / LiPo Cell
    Hard Cut Voltage: 2.6V / LiPo Cell
• High Temperature Protection:
    Soft Cut Temp. - 110°C / 230°F
    Hard Cut Temp. - 120°C / 248°F
• Approximate Size: 38mm x 24mm x 9mm
• Approximate Weight: 21.5g