The Predator series has been unmatched in quality, performance and affordability making it the best selling gasoline powered helicopter in the world. With our constant strive for perfection, the Predator gasser has been engineered and improved upon to what is in your hands today. Being one of the few gas powered helicopters that can perform full 3D aerobatic maneuvers yet still be used as a sport flyer or even for industrial purposes, the Predator gasser is a well rounded machine.
Features:
- Lightweight yet extremely strong G10 frames, tail fin set, cooling shroud mount plate, electronics tray, and switch plate.
- Stainless steel torque tube driven tail system.
- Blade grips will accommodate blades with 12mm to 18mm blade roots.
- Large 22 oz fuel tank for long engine run time.
- Convenient and easy access to spark plug.
- Triple bearing supported blade grips and tail blade grips.
- Machined dual ball bearing swashplate for 120 degree CCPM.
- Adjustable bell-hiller ratio allows tuning for preferred cyclic response.
- Tunable flight characteristics for stability or speed.
- All metal, lightweight swashplate with Teflon Coated Center Ball.
- Includes 2 sets of flybar paddles. One set for stability, the other for aerobatics.
- Anodized titanium-colored aluminum 1-piece cooling fan and center hub, lower bearing block, start shaft bearing block, main shaft bearing block, landing gear frame, reinforcement bars, and frame spacers.
- Redesigned upper main frame and servo frames for a sleeker look.
- Even clutch shoe expansion offers improved grabbing force.
- Clutch Bell is machined with angle cut to offer improved rigidity.
- Shorter Flybar for faster cyclic response.
- Landing gear frame is notched for a better fit for the coil of the Zenoah engine.
- Higher Profile Landing Struts as compared to the previous version.
Specifications ( standard Gasser, Carbon SE, Condor ):
- Length: 141.5 - 152.4 cm
- Height: 48.6cm - 50.4cm
- Main Blade: 680-830mm
- Main Rotor Diameter: 159.8cm
- Tail Diameter: 26.7cm - 28.6cm
- Engine: Gas 23cc to 26cc
Just Provide ( Items required to fly but not included ):
- 1x 680mm-720mm Main Blades (710mm-720mm carbon fiber recommended)
- 1x 6-Channel or better Radio Transmitter system capable of 120 degree eCCPM mixing.
(7 Channels or better recommended, for governor)
- 1x 6-Channel or better Receiver and Receiver Battery.
(7 Channels or better recommended, for governor)
- 1x 23cc to 26cc Gasoline Engine.
- 1x Muffler.
- 5x Sport line or better Servos.
- 1x Gyro. (Heading Lock/Hold recommended)
- 1x Governor (optional but recommended)
- 1x Crystal Set. (if using non-2.4GHz radio sytem)
- 1x 87 to 92 Octane Gasoline.
- 1x 2-Stroke Motor Oil.
- 1x Synthetic Oil/Grease.
- 1x Starting Equipment (if not using a pull starter).
- 1x RC Helicopter Tools.
Gasser Home