Century Helicopter Products Logo

Manufacturing and Marketing R/C helicopters since 1987

 > MultiRotor > Pro Multi-Rotors > Dji S800

MSRP $1900.00

[Century] Buy Dji Spread Wings S800 Hex-Rotor ARF RC Helicopter (DJIS800)

DJI S800

UAV Hex-Rotor R/C Helicopter

Pilot Skill Level: Intermediate to Experienced

Part# DJIS800

[Century] Dji Spread Wings S800 Hex-Rotor ARF RC Helicopter (DJIS800)

DJI's Spreading Wings S800 is a hex-rotor aircraft developed for aerial photography, search and rescue team, and surveillance. Rapid Deployment ... redefined. From "in the box" to "in the air" is less than 5 minutes! All electronics, motors and propellers are fully integrated into the molded composite arms; swapping out an entire arm assembly (including Arm, ESC, Motor, and Propeller) can be done without tools in a matter of seconds. With the help of DJI's WooKong-M autopilot system, large-radius turns, precise hovering, and maintaining constant air speed has never been easier!

DJI highly recommends you to use the most advanced WooKong-M series multi-rotor autopilot System, which provides the impressive stability, accuracy and safety for flight mission. It can be extended with Ground Station Control System.

Zenmuse Z15 can take perfect footage with no angle limitation. Combined with the optional cameras will definitely underline its powerful stability performance. It is recommended to mount on S800. This combination is surely your best choice for aerial photography.

The highly electromechanical intergration design allows for quick part replacement when crash occurs; greatly reduces down time.

Features:

  • The Professional Hex-Rotor Platform Big Aircraft:

    Spreading Wings S800 is a professional Hex-Rotor Platform Big Aircraft, designed for commercial aerial photography (AP) and experienced model enthusiasts. It has the advantage of stable flight, large load weight and long flight time. Combined with DJI WooKong-M multi-rotor autopilot system, S800 can easily perform precise hovering, constant-speed cruise and big maneuverability turning.

  • Curcuit-Integrated Centre Frame:

    All the circuitries from batteries to electronic components of Frame Arms, PMU and gimbals are integrated into Centre Frame, which simplifies the wiring?reduces the possibility of malfunction and helps a lot to operate quick disassembly.

  • High-Integrated Frame Arms Design:

    With innovative integration design of Frame Arms, all the power and signal wires of motor, ESC and LED indicator are embed into Frame Arms, which makes the S800 Frame Arms look simple and neat, not a batch of separated parts and wires. Special slot design makes Frame Arms and Centre Frame with a complete circuitry. The overall design is safe, reliable, simple and stable, proved by long-time strict testing.

  • Integration Design of ESC:

    The components of ESC are installed inside the neat Frame Arms beneath the motors, which solve the problem of heat radiating. LED indicator is included to ESC, and can be used to easily identify the nose and tail for S800.

  • The High Performance Brushless Motors:

    Brushless motors with special design and high performance reduce noise and vibration, smooth turning, improve the stability and performance of aircraft, simplify maintaining and extend its lifetime.

  • High Efficient Carbon Fiber Propellers:

    All the carbon fiber propellers of S800 have been tested for its balance and strictly selected. The carbon fiber propellers have the characteristic of exquisite appearance, light weight, high efficiency, and high strength and so on.

  • Clear Installation Signs:

    Clear guiding signs ( and ) for connection are shown on the Centre Frame and Frame Arms. The connection sequence between Frame Arms and Main Controller is also shown as signs which help avoid incorrect installation.

  • Quick Assembly and Disassembly Landing Skid:

    Simple steps to assemble and disassemble S800 Landing skid, rather convenient to carry and transport. Almost the whole high strength landing skid is made of carbon fiber material, which can support large weight loading with two aspects of tenacity and hardness.

  • Perfect Wookong-M Matched:

    WooKong-M IMU installation position has been reserved in the Centre Frame. In addition, signs on the slot of the Centre Frame clarify the channelsí numbers of the WooKong-M IMU, which helps users to install the autopilot system correctly and rapidly.

Includes:

  • 1 set Central Board
  • 6 pcs Arms
  • 6 pcs Motor 4114 kv320
  • 6 pcs ESC 2-6S 40A
  • 6 pcs 15" Carbon Fiber Propeller
  • 1 set Landing Skid

Requires:

  • 1x Multi-Rotor controller
  • 1x 6S Li-Po 10000mAh - 15000mAh 15C (Min) battery
  • 1x Aircraft radio transmitter and receiver system with fail safe function.

Recommended Completion Parts: