Authorized Retail Store
Authorized Dealer and Distributor
Official Service Center
WOOKONG-H DJIís first stabilization system built for scale/hobby helicopter enthusiasts, which works on all kinds of scale/hobby helicopters: aircraft with Bi-blade or Tri-blade, with or without flybar, with all kinds of swash-plates and rotor heads, electronic or gasoline or turbine helicopter engines. All types of scale or hobby helicopters can be installed with WOOKONG quickly and easily.
WOOKONG-H components weigh around 140g combined, which can be almost ignored from the payload. The size of the main controller is 51mm X 35mm X 15mm, IMU module is 41mm X 31mm X 28mm, and the GPS module (not included in Lite version) has a diameter of 50mm and a height of 9mm, LED module is 25mm X 25mm X 7mm. The whole WOOKONG-H package is smaller than a standard package cigarette box. WOOKONG-H can even be installed on size 450 helicopter.
The installation of WOOKONG-H is much similar to Ace One. The innovative built-in damping system allows the helicopter to be installed without additional frames and dampers. The system helps customers to minimize size, reduce weight and give simplified installation that can be applied on different helicopter models. Customers also have more options for physical installation.
WOOKONG-H offers three types of control modes: GPS Atti. Mode (not available in Lite version), Atti. Mode, Manual Mode (excluding GPS Cruise Mode of Ace One). Customers can switch between the three modes (two for Lite version) to adjust different flight environments even in the specially weak GPS environment such as: Building clearance, valley clearance, bridge bottom or mountain cave. WOOKONG-H also can also adjust automatically in the flight environment. For example when aircrafts come through the bridge bottom with GPS intermittence, WOOKONG-H system switches between GPS mode and Atti. Mode automatically to ensure safety and security of flight.
In GPS Atti. Mode, it is not only can keep aircraft attitude stable and also lock the aircraft position accurately.GPS Atti. Mode has the same performance with GPS Atti. Mode. Stick center position for 0° attitude, its endpoint for 45° which is a fixed limit. GPS Atti. Mode can be used in promptly and with a big flight movement. It will bring to you a new and excellent flight experience.
Atti. Mode is suitable for when no GPS or weak GPS signal is achieved. WooKong-H can control attitude stabilization and lock flight altitude accurately; Stick center position for 0° attitude, its endpoint for 45° which is a fixed limit. Atti. Mode also can be used promptly and with a big flight movement.
Manual Mode is mechanical driving directly. With Flybarless support, autopilot will not stabilise the aircraft. Manual Mode is suitable for the experienced pilot.
Autopilot system offers longitude & latitude locking and high accuracy hovering with the GPS. Even in a windy environment, aircraft can hover in a small scale area. Accuracy (with GPS): horizontal ≤2 meters. Altitude ≤1 meters.
With the help of WooKong-H, controlling aircraft feels like driving a car, as simple and intuitive strong control of the flight itself has become an easy and precise operation; The pilot can focus more attention in other areas, such as controlling the camera angle, without tension in the driving.
In GPS Atti. Mode (not availavle in Lite version) or Atti. Mode, requiring only a push of the throttle (collective pitch) stick gently to take-off helicopter, the autopilot system will be in charge of the cyclic pitch/roll stabilization.
Enhanced failsafe is the feature to ensure that the helicopter will hover automatically if it loses the RC signal. This feature will protect your expensive payloads and equipment.
The tail gyro and FBL have become standard features of WooKong-H. No more extra work installing additional tail gyros and FBL electronic parts. The helicopterís electronic system has been greatly simplified. Therefore different electrical parts can be connected much more easily. One central piece calculates all of the flying configurations.
The engine speed lock and governor are also standard features for WooKong-H. The built-in engine governor simplifies the parameter settings, and increases the compatibility of the system. All you need is to connect an extra standard sensor to use.
All the setting data can be saved as files that export from WooKong-H system . Alternatively import the file to current main controller to avoid reboot calibration.
The professional DJI R&D team continuously provide the latest control algorithms and features/modules. You donít have to mail the unit back or find service centres to upgrade anymore. All the upgrades can be done online. All you have to do is click!